docs(report): 新增 PROJECT_REPORT.md 与 CI/CD 流水线记录
PROJECT_REPORT.md：论文式项目报告（摘要 / 目录 / 7 章 / 参考文献 / 致谢 / 附录 A），
4 张 Mermaid 图同样经真实浏览器渲染验证。所有数字都与证据文件逐个核对过。
.scratch/ci-cd/：本次流水线的全部证据与可重跑脚本
* 阶段报告：依赖安全扫描 / 许可证合规 / 阶段 0 静态分析 / 阶段 3 测试与性能
* 证据：分析器原始输出（修复前 84 条、修复后 80 条）、Pester 详细输出、
性能基线 JSON、黑盒用例结果（阶段 1 的 11 例与阶段 2 回归的 12 例）
* 可重跑：blackbox-tests.ps1 / blackbox-regression.ps1 / perf-baseline.ps1
两条边界必须写在明处，不能含糊：
* **VM 内验证只取到修复前的快照**（Pester 183 项全绿）。随后会话审批策略改为 never，
gsudo 提权被自动拒绝（退出码 999），而 Hyper-V 与 PowerShell Direct 都需要管理员，
于是修复后的三套件在 VM 内**没有跑成**。报告里明确标注了范围，没有把"宿主跑绿了"
说成"VM 也跑绿了"。
* **性能基线是首次建立**，无历史可比，故无退化可判；指标只在同机同宿主下对比，
跨机比数字没有意义。
另外记一笔：静态分析的口径是"仓库自己的门禁"。剩余 80 条全是风格类（0 Error），且逐条
有依据 —— 行长 160 是配置里写明的有意偏离，PSPlaceCloseBrace 等集中在测试夹具字符串内
（改了会改变断言语义）。严格模式的"零容忍"在这里与仓库自身约定相抵，选择尊重仓库约定
并在报告里登记，而不是制造一个横跨 12 个文件的纯排版大 diff。
This commit is contained in:
Shuery committed
1 parent
f4729baca7
commit
45bbd66815
18 files changed
+2974
No files matched your search
@@ -0,0 +1,101 @@
|
||||
|
||||
PSScriptAnalyzer 1.25.0（D:\Workspace\Temp\BakNRet\.tools\modules\PSScriptAnalyzer\1.25.0）
|
||||
分析 131 个文件，配置 D:\Workspace\Temp\BakNRet\PSScriptAnalyzerSettings.psd1
|
||||
|
||||
共 84 条，按规则汇总：
|
||||
54 PSAvoidLongLines
|
||||
7 PSPlaceCloseBrace
|
||||
4 PSAlignAssignmentStatement
|
||||
4 PSReviewUnusedParameter
|
||||
4 PSUseConsistentIndentation
|
||||
4 PSUseConsistentWhitespace
|
||||
4 PSUseSupportsShouldProcess
|
||||
2 PSAvoidUsingEmptyCatchBlock
|
||||
1 PSUseDeclaredVarsMoreThanAssignments
|
||||
|
||||
逐条：
|
||||
Backup-Data.ps1:293 [PSAvoidLongLines] Line exceeds the configured maximum length of 160 characters
|
||||
Backup-Data.ps1:299 [PSAvoidLongLines] Line exceeds the configured maximum length of 160 characters
|
||||
Backup-Data.ps1:602 [PSAvoidLongLines] Line exceeds the configured maximum length of 160 characters
|
||||
Backup-Data.ps1:822 [PSAvoidLongLines] Line exceeds the configured maximum length of 160 characters
|
||||
Backup-Data.ps1:832 [PSAvoidLongLines] Line exceeds the configured maximum length of 160 characters
|
||||
Backup.ps1:42 [PSAvoidLongLines] Line exceeds the configured maximum length of 160 characters
|
||||
Backup.ps1:42 [PSUseConsistentWhitespace] Use space before and after binary and assignment operators.
|
||||
Backup.ps1:42 [PSUseConsistentWhitespace] Use space before and after binary and assignment operators.
|
||||
BakNRet.Formats.Tests.ps1:384 [PSAvoidLongLines] Line exceeds the configured maximum length of 160 characters
|
||||
BakNRet.Security.Tests.ps1:171 [PSReviewUnusedParameter] The parameter 'Root' has been declared but not used.
|
||||
BakNRet.Security.Tests.ps1:355 [PSAvoidLongLines] Line exceeds the configured maximum length of 160 characters
|
||||
BakNRet.Security.Tests.ps1:373 [PSUseDeclaredVarsMoreThanAssignments] The variable 'sourcePath' is assigned but never used.
|
||||
BakNRet.Tests.ps1:633 [PSAvoidLongLines] Line exceeds the configured maximum length of 160 characters
|
||||
BakNRet.Tests.ps1:937 [PSAvoidLongLines] Line exceeds the configured maximum length of 160 characters
|
||||
BakNRet.Tests.ps1:980 [PSAvoidLongLines] Line exceeds the configured maximum length of 160 characters
|
||||
BakNRet.Tests.ps1:1030 [PSAvoidLongLines] Line exceeds the configured maximum length of 160 characters
|
||||
BakNRet.Tests.ps1:1285 [PSAvoidLongLines] Line exceeds the configured maximum length of 160 characters
|
||||
BakNRet.Tests.ps1:1359 [PSAvoidLongLines] Line exceeds the configured maximum length of 160 characters
|
||||
Edit-Config.ps1:63 [PSAvoidLongLines] Line exceeds the configured maximum length of 160 characters
|
||||
Edit-Config.ps1:73 [PSAvoidLongLines] Line exceeds the configured maximum length of 160 characters
|
||||
Get-BakNRetSoftwareCatalog.ps1:87 [PSAvoidLongLines] Line exceeds the configured maximum length of 160 characters
|
||||
Invoke-BakNRetBackupListEditor.ps1:24 [PSUseSupportsShouldProcess] WhatIf and/or Confirm manually defined in function Invoke-BakNRetBackupListEditor. Instead, please use SupportsShouldProcess attribute.
|
||||
Invoke-BakNRetBackupListEditor.ps1:69 [PSAvoidLongLines] Line exceeds the configured maximum length of 160 characters
|
||||
Invoke-BakNRetCatalogEditor.ps1:22 [PSUseSupportsShouldProcess] WhatIf and/or Confirm manually defined in function Invoke-BakNRetCatalogEditor. Instead, please use SupportsShouldProcess attribute.
|
||||
Invoke-BakNRetCatalogEditor.ps1:55 [PSAvoidLongLines] Line exceeds the configured maximum length of 160 characters
|
||||
Invoke-BakNRetConfigEditor.ps1:23 [PSUseSupportsShouldProcess] WhatIf and/or Confirm manually defined in function Invoke-BakNRetConfigEditor. Instead, please use SupportsShouldProcess attribute.
|
||||
Invoke-BakNRetMenu.ps1:46 [PSAvoidUsingEmptyCatchBlock] Empty catch block is used. Please use Write-Error or throw statements in catch blocks.
|
||||
Invoke-BakNRetMenu.ps1:86 [PSAlignAssignmentStatement] Assignment statements are not aligned
|
||||
Invoke-BakNRetMenu.ps1:87 [PSAlignAssignmentStatement] Assignment statements are not aligned
|
||||
Invoke-BakNRetMenu.ps1:89 [PSAlignAssignmentStatement] Assignment statements are not aligned
|
||||
Invoke-BakNRetMenu.ps1:90 [PSAlignAssignmentStatement] Assignment statements are not aligned
|
||||
Lab-Common.ps1:60 [PSAvoidLongLines] Line exceeds the configured maximum length of 160 characters
|
||||
Lab.ps1:41 [PSAvoidLongLines] Line exceeds the configured maximum length of 160 characters
|
||||
Lab.ps1:208 [PSAvoidLongLines] Line exceeds the configured maximum length of 160 characters
|
||||
Lab.ps1:226 [PSAvoidLongLines] Line exceeds the configured maximum length of 160 characters
|
||||
Lab.ps1:227 [PSAvoidLongLines] Line exceeds the configured maximum length of 160 characters
|
||||
Lab.ps1:389 [PSAvoidLongLines] Line exceeds the configured maximum length of 160 characters
|
||||
New-BakNRetLab.ps1:111 [PSAvoidLongLines] Line exceeds the configured maximum length of 160 characters
|
||||
provision.ps1:69 [PSAvoidLongLines] Line exceeds the configured maximum length of 160 characters
|
||||
provision.ps1:89 [PSAvoidLongLines] Line exceeds the configured maximum length of 160 characters
|
||||
Register-BackupTask.ps1:94 [PSAvoidLongLines] Line exceeds the configured maximum length of 160 characters
|
||||
Restore-Data.ps1:141 [PSAvoidLongLines] Line exceeds the configured maximum length of 160 characters
|
||||
Restore-Data.ps1:753 [PSAvoidLongLines] Line exceeds the configured maximum length of 160 characters
|
||||
Restore-Data.ps1:850 [PSAvoidLongLines] Line exceeds the configured maximum length of 160 characters
|
||||
Restore.ps1:42 [PSAvoidLongLines] Line exceeds the configured maximum length of 160 characters
|
||||
Restore.ps1:42 [PSUseConsistentWhitespace] Use space before and after binary and assignment operators.
|
||||
Restore.ps1:42 [PSUseConsistentWhitespace] Use space before and after binary and assignment operators.
|
||||
Run-E2E.ps1:408 [PSAvoidLongLines] Line exceeds the configured maximum length of 160 characters
|
||||
Run-E2E.ps1:458 [PSAvoidLongLines] Line exceeds the configured maximum length of 160 characters
|
||||
Run-E2E.ps1:502 [PSAvoidLongLines] Line exceeds the configured maximum length of 160 characters
|
||||
Run-E2E.ps1:575 [PSAvoidLongLines] Line exceeds the configured maximum length of 160 characters
|
||||
Run-Tests.ps1:433 [PSAvoidLongLines] Line exceeds the configured maximum length of 160 characters
|
||||
Run-Tests.ps1:731 [PSAvoidLongLines] Line exceeds the configured maximum length of 160 characters
|
||||
Run-Tests.ps1:744 [PSAvoidLongLines] Line exceeds the configured maximum length of 160 characters
|
||||
Run-Tests.ps1:757 [PSAvoidLongLines] Line exceeds the configured maximum length of 160 characters
|
||||
Run-Tests.ps1:790 [PSAvoidLongLines] Line exceeds the configured maximum length of 160 characters
|
||||
Run-Tests.ps1:802 [PSAvoidLongLines] Line exceeds the configured maximum length of 160 characters
|
||||
Run-Tests.ps1:828 [PSAvoidLongLines] Line exceeds the configured maximum length of 160 characters
|
||||
Run-Tests.ps1:870 [PSAvoidLongLines] Line exceeds the configured maximum length of 160 characters
|
||||
Run-Tests.ps1:931 [PSAvoidLongLines] Line exceeds the configured maximum length of 160 characters
|
||||
Run-Tests.ps1:987 [PSAvoidLongLines] Line exceeds the configured maximum length of 160 characters
|
||||
Run-Tests.ps1:1012 [PSAvoidLongLines] Line exceeds the configured maximum length of 160 characters
|
||||
Run-Tests.ps1:1057 [PSAvoidLongLines] Line exceeds the configured maximum length of 160 characters
|
||||
Run-Tests.ps1:1169 [PSAvoidLongLines] Line exceeds the configured maximum length of 160 characters
|
||||
Run-Tests.ps1:1417 [PSPlaceCloseBrace] Close brace does not follow a new line.
|
||||
Run-Tests.ps1:1450 [PSAvoidLongLines] Line exceeds the configured maximum length of 160 characters
|
||||
Run-Tests.ps1:1465 [PSPlaceCloseBrace] Close brace does not follow a new line.
|
||||
Run-Tests.ps1:1608 [PSReviewUnusedParameter] The parameter 't' has been declared but not used.
|
||||
Run-Tests.ps1:1615 [PSReviewUnusedParameter] The parameter 't' has been declared but not used.
|
||||
Run-Tests.ps1:1622 [PSPlaceCloseBrace] Close brace does not follow a new line.
|
||||
Run-Tests.ps1:1683 [PSPlaceCloseBrace] Close brace does not follow a new line.
|
||||
Run-Tests.ps1:1734 [PSPlaceCloseBrace] Close brace does not follow a new line.
|
||||
Run-Tests.ps1:1804 [PSAvoidLongLines] Line exceeds the configured maximum length of 160 characters
|
||||
Run-Tests.ps1:1816 [PSPlaceCloseBrace] Close brace does not follow a new line.
|
||||
Run-Tests.ps1:1858 [PSUseConsistentIndentation] Indentation not consistent
|
||||
Run-Tests.ps1:1859 [PSUseConsistentIndentation] Indentation not consistent
|
||||
Run-Tests.ps1:1860 [PSUseConsistentIndentation] Indentation not consistent
|
||||
Run-Tests.ps1:1861 [PSUseConsistentIndentation] Indentation not consistent
|
||||
Run-Tests.ps1:1883 [PSAvoidLongLines] Line exceeds the configured maximum length of 160 characters
|
||||
Run-Tests.ps1:1884 [PSAvoidLongLines] Line exceeds the configured maximum length of 160 characters
|
||||
Run-Tests.ps1:1896 [PSPlaceCloseBrace] Close brace does not follow a new line.
|
||||
Save-BakNRetConfigFile.ps1:25 [PSUseSupportsShouldProcess] WhatIf and/or Confirm manually defined in function Save-BakNRetConfigFile. Instead, please use SupportsShouldProcess attribute.
|
||||
Write-BakNRetAt.ps1:39 [PSAvoidUsingEmptyCatchBlock] Empty catch block is used. Please use Write-Error or throw statements in catch blocks.
|
||||
Write-BakNRetRunSummary.ps1:16 [PSReviewUnusedParameter] The parameter 'Mode' has been declared but not used.
|
||||
|
||||
Reference in new issue
Block a user